Shipping on more then one item
can be combined at the higher of
the items. Up to 5 items can go at
one rate
N scale kits by Rslaserkits
We are working on new kits for model railroading, in
O scale,HO and N-Scale
E-Mail us with your ideas of what you would like to
see in the line of kits.
Sales@Rslaserkits.com
Lumber yard Supply kit in HO scale.
You get the same parts as in the
N-scale kit but the trusses are cut from
1/32 stock. $11.49 ea
Order kit HCK-01
This is the Garage shell kit. It builds
one garage shell as in the photo on
the left below. $17.95 plus shipping
Order Kit NGS-01
Here are some photos of the next kits.
The Kits will have parts to build one
Garage with interior studs or just build
it using the outer walls and have one
under construction. The parts include
two door options, a famed door as
shown on the right side and a more
modern roll up door on the left side,
plus extra trusses and plywood sheets
to add to that construction site look.
These run $12.95 for the Framing kit
or $29.98 for the combined kits
(frame,construction kit less the trusses
and shell kit)
For the framing kit order NGF-01
and for the combined kit NSG-01
N-scale fencing kits.
These are a scale 6 foot tall
These are true kits with laser cut
support framing, all fence kits come
with 4- 24 ft. Sections of fence and a 4
ft gate section for a total of 100 scale
feet of fencing
Security fence note the frame on back
side. All laser cut all you need to do is
glue the frame on and set on your
layout. This fence has 144 scale ft and
no gate
NSF-01 for the 6 ft high security fence
$5.95
Privacy Fence this would look
great around that hot tub or the back
yard on any house. You get 4-24 foot
sections for 96 scale feet.
NPF-03 priced at $6.49
N Scale logging bunk house car. This
car can be mounted on your flat car or
set on the supplied skids. Either was
used in the log camps. The kit is laser
cut using
micro plywood and all glazing material
is supplied except for the roofing which
was either tar paper or metal. $19.25
Kit NBH-01
The Saw Filers Shack
This kit is based on one used by the Manary
logging co. in the 1920's.
It also could be used today as a flower-garden
shop or Artist Studio and look great. All 20 of
the front and side widows are laser cut as
double hung and can be positioned in any open
layout you want. The kit is supplied with skids
and all the parts are laser cut from micro
plywood, the only parts not supplied are cast
detail parts.$21.50 plus shipping of $4 in the
USA and $5.00 overseas
Kit NSFS-02
Paul's repair
Another kit based on Paul Templar's design.
This time a repair and horse shoeing shop.
Kit comes with the printed signs and a glue
down tar paper roof.
Kit NPRS-01 price $20.95
If your ordering by check
Please make out to
RslaserkitS
5145 Gaffin rd. se.
Salem,OR 97301
Some of our future kits
N Scale Booth Kelly Company store in
Saginaw,Or. I'm still working on the
second floor and other details and am
hoping to have ready soon. It is taking
longer then I hoped to get all the parts
done how I what them done.
Woss Camp water tower. Still need to
finish the directions then will be ready
for production, hoping for mid-Summer
with a HO version soon after.
This is the only authorized kit made
from the plans by Tom Beaton
Z scale one stall engine house
N scale and Ho scale
one stall engine house
Our first N-Scale offering.
Lumber yard supplies
you get 12- 24 foot wood trusses,12
sheets of T-111 siding and 16sheets
of plywood, two 16 ft ladders
plus as a added bonus 6 saw horses.
$7.50 plus shipping
Order kit NCK-01
Good Neighbor Fence
Has boards on both sides
of frame.
NGNF-01 for the good neighbor fence
$6.49
A small Saloon and repair shop, base
on a design by Paul Templar. Has
Saloon doors and all signs as shown.
Also has a glue down tar paper roof.
The saloon is named for the husband
of one of my co-workers that has
cancer and could not find a Saloon for
his layout.
Kit NGSR-01 price $21.50
